igusigus-icon-cart(0)

iglidur® G V0, sleeve bearing, mm

V0 rating according to UL94, universal
iglidur® G V0, sleeve bearing, mm
iglidur® G V0, sleeve bearing, mm drawing
1 od 2
iglidur® G V0, sleeve bearing, mm
iglidur® G V0, sleeve bearing, mm drawing
igus-icon-lupe
  • Številka dela: GV0SM-0608-06
  • Material: iglidur® GV0
  • Oblika: Nakup drsnih ležajev
  • Dimenzije:
    • d1 6 mm
    • d2 8 mm
    • b1 6 mm
  • Prilagodite dimenzije
  • Način izdelave: Brizganje
  • Življenjska doba:

    Ni na voljo

    igus-icon-info-circle-gray
Lastnosti materiala:
  • Resistant to shocks and impacts
  • Resistant to high loads (>60N/mm²)
  • Mould resistant according to DIN EN ISO 846
Skupna cena:

plus DDV in stroški pošiljanja

igus-icon-lieferzeit-dot
ready for shipping in 24-48 hours
iglidur® G V0 | V0 rating according to UL94, universal
iglidur® GV0 is the first iglidur® material with V0 rating according to UL94 for universal use in the normal temperature range. It is predestined for applications with high fire protection requirements (vehicle interior, aviation, building services, etc.). All other iglidur® materials with V0 rating are part of the high-temperature segment. The general mechanical and thermal specifications are largely comparable with the all-rounder iglidur® G.

Typical application areas
  • Passenger seats
  • Elevators
  • Escalators
  • Switch cabinets
  • Hinges
Find more applications here:
Industry solutions

 
When to use it?
  • When a UL94 V0 classified plain bearing for normal environmental conditions is required
  • When an economic UL94 V0 classified plain bearing is required
When not to use it?Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods

Assembly
iglidur® bearings are press-fit bushings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
 
Niste prepričani, ali ustreza?
Kaj lahko izboljšamo za vas? Pošljite nam povratne informacije.

O igusu®

Storitve

Kontakt

Naši plačilni sistemi

  • Nakup po naročilu

    Sledite nam

      Bodite na tekočem in se naročite na igusove novice.

      igus-icon-globeJezik:slov|Država:Slovenija

      The terms "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "RCYL", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "tribotape", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" and "yes" are legally protected trademarks of the igus® GmbH/ Cologne in the Federal Republic of Germany and where applicable in some foreign countries. This is a non-exhaustive list of trademarks (e.g. pending trademark applications or registered trademarks) of igus GmbH or affiliated companies of igus in Germany, the European Union, the USA and/or other countries or jurisdictions.

      igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM,Parker, Bosch Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mention on this website. The products offered by igus® are those of igus® GmbH