1 od 2
igus-icon-lupe
- Številka dela: TX1SM-2024-15
- Material: igutex® TX1
- Oblika: Nakup drsnih ležajev
- Dimenzije:
- d1 20 mm
- d2 24 mm
- b1 15 mm
- Prilagodite dimenzije
- Način izdelave: Navit
- Življenjska doba: Ni na voljo
The heavy-duty bearing up to 200 MPa
- Up to 200 MPa static and 140 MPa dynamic
- Wear-resistant and dimensionally stable
- Good liquid media resistance
Skupna cena: Cena na povpraševanje
plus DDV in stroški pošiljanja
igus-icon-lieferzeit
Rok dobave po povpraševanju.
igutex® TX1 | The heavy duty bearing up to 200 MPa
Typical applications
Agriculture
Construction machinery
Heavy machinery / Plant construction
Here you can find further applications:
Industry solutions
Use our filter options to find the suitable product
Tolerances and measuring system
The installation dimensions and tolerances of the igutex® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
Assembly
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
- Up to 200MPa static and 140MPa dynamic
- Wear-resistant and dimensionally stable
- Good media-resistance
- Lubrication-free and maintenance-free
- Standard range from stock
Typical applications
Agriculture
Construction machinery
Heavy machinery / Plant construction
Here you can find further applications:
Industry solutions
When do I need it?
| When do I not need it?
|
Tolerances and measuring system
The installation dimensions and tolerances of the igutex® plain bearings depend on the material and wall thickness. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be installed with a smaller bearing clearance. The rule for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Testing methods
Assembly
igutex® plain bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearings. Axial or radial movements in the housing are thus reliably avoided.
iglidur® - assembling, gluing, machining
Niste prepričani, ali ustreza?